Materials:
Dozen eggs
Vinegar
Silk ties- they must be 100% silk
Cotton squares
Baby snot sucker- its there a real name for these things?
Scissors
Push pin, screw, paper clip
Small rubber bands
Pot to boil the eggs in
Egg Blowing:
This is going to get rid of everything inside the egg so we just have a shell. If you want, you can skip this part and move to the silk dying so that you have hard boiled eggs.Start by poking a hole into both ends of the egg with a push pin. Then, choose one side of the egg to make the hole bigger. Do this by gently using the screw. Once you have a larger hole unfold your paper clip. Insert this into the larger hole and move it around. Basically, you want the inside to be scrambled as best as possible so that it easily comes out of the shell.
![](https://lh4.googleusercontent.com/-gTtKji_mIh0/T3ocLwdyLOI/AAAAAAAAARs/hFFq9SodMCk/s320/Photo%252520Apr%2525201%25252C%2525202012%2525204%25253A05%252520PM.jpg)
Next, use the baby snot sucker to blow air through the smaller hole. This should make the egg insides come out the other end. If you want, blow the egg into a bowl so that you can use the egg for other purposes. Make sure everything comes out of the eggs. I usually run a little water through the egg as well just to clean it out some more.
Silk Dying:
First is to take the tie apart. It needs to be deconstructed so that you are left with a flat piece of silk that can be cut into smaller pieces. Begin by cutting off all tags on the scarf. Then, cut up the back middle seam. Remove the inside lining From the tie. Cut the tie into pieces that will fit around your eggs. I did six of each color since I had two ties.
Place the tie face up, the color side needs to be facing the egg shell. That will be the design that is on the egg. Try to get the silk as close and cleanly pressed onto the side of the egg that will be showing as possible. Wrap this all with a cotton piece and then close with a rubber band.
When you have the eggs wrapped up put them in the pot with about 1/4 cup of vinegar and water so that they will be covered. If you blew the eggs out they will float so you will have to be creative and figure out a way to keep them submerged. One way is to use a strainer turned upside down on them or even use some smaller lids to hold them down; it doesn't matter how you do it along as they stay under water.
Let those boil for about 15-20 minutes, or longer if you are doing hard boiled eggs. I recommend doing about 3-4 eggs at a time since the cloth takes up extra space in the pot. After they have boiled place them in a strainer in the sink. Allow the eggs to cool before you cut the rubber band and remove the silk and cotton.
When you take the silk and cotton off you will be left with some very petty eggs. The silk can be used again to dye more eggs. You will find through doing this more that some ties make really pretty eggs and some do not transfer as well. It's really just a hit or miss kind of thing but I have found the uglier tied make better eggs.
I filled some eggs with melted chocolate for my neices and nephews for Easter. I also used some in a vase with some Easter grass. Another idea is to use some for a Easter wreath. Basically, just be creative and have fun :)
Below is my first YouTube tutorial. I'm still getting the hang of it, but I hope you enjoy. Check out my YouTube channel for more video tutorials weekly and subscribe to me there.
No comments:
Post a Comment